Sluiten

Verlanglijstje

Hosco Japan H-FS10

Hosco Japan H-FS10

This brass fretsetter is ideal to tap down a fret without loosening the strings. If a fret has moved upwards, it can be reset with the fretsetter and a tap of a hammer.The fretsetter fits over the crown of the fret.This is a well designed brass tool with the right weight and a length of 100 mm and it has a width of 7 mm.Also very usefull to hold do...

Snel naar

Prijzen

PrijzenProductomschrijving

32,75

Webshops met dit product

Webshop

Bezorging

Prijs

Anderen bekeken ook

Hosco Japan H-FS10

Hosco Japan H-FS10

This brass fretsetter is ideal to tap down a fret without loosening the strings. If a fret has moved upwards, it can be reset with the fretsetter and a tap of a hammer.The fretsetter fits over the crown of the fret.This is a well designed brass tool with the right weight and a length of 100 mm and it has a width of 7 mm.Also very usefull to hold down a fret that is being glued in.

Hosco Japan H-FE2

Hosco Japan H-FE2

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 2 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE2 is for medium frets.

Hosco Japan H-FE1

Hosco Japan H-FE1

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE1 is for small frets.

Hosco Japan H-FE1

Hosco Japan H-FE1

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE1 is for small frets.

Hosco Japan H-FE3

Hosco Japan H-FE3

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE3 is for wide frets.

Hosco Japan H-FE2

Hosco Japan H-FE2

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 2 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE2 is for medium frets.

Hosco Japan H-FE3

Hosco Japan H-FE3

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE3 is for wide frets.

Hosco Japan H-FC190

Hosco Japan H-FC190

This fret cutter was developed at the factory that has 85 years of history in making cutting pliers by Japanese traditional manufacturing methods.The material is special steel which we call high carbon tool steel.190 mm total length with a 26 mm blade width.Flat and sharp cutting edges makes very flat fret end.This is not suitable for stainless steel frets. Please use H-FC28SS for that.

Hosco Japan H-FC190

Hosco Japan H-FC190

This fret cutter was developed at the factory that has 85 years of history in making cutting pliers by Japanese traditional manufacturing methods.The material is special steel which we call high carbon tool steel.190 mm total length with a 26 mm blade width.Flat and sharp cutting edges makes very flat fret end.This is not suitable for stainless steel frets. Please use H-FC28SS for that.

Hosco Japan H-FPR-SET

Hosco Japan H-FPR-SET

Set of 4 fret polishing rubbers.150-180-400-1000 grit.Easy and fast fret polishing tool. Erasing the small scratches of the fret polishing or cleaning dirty frets. Because of this softness, rubber fits to fret arch perfectly. Also soft rubber keeps the fingerboard damage to a minimum. Easy to cut this rubber by cutter knife for your fret work. This is a great rust remover and polisher!

Klanten-reviews van Hosco Japan H-FS10

Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

Meer over Hosco Japan H-FS10

Productomschrijving

This brass fretsetter is ideal to tap down a fret without loosening the strings. If a fret has moved upwards, it can be reset with the fretsetter and a tap of a hammer.The fretsetter fits over the crown of the fret.This is a well designed brass tool with the right weight and a length of 100 mm and it has a width of 7 mm.Also very usefull to hold down a fret that is being glued in.

Verken gerelateerde categorieën

Muziekaccessoires Muziekinstrumenten