shopblog.nl
Categorieën
  Sluiten

Inloggen

Verlanglijstje

Hosco Japan H-FPR-SET

Hosco Japan H-FPR-SET

Set of 4 fret polishing rubbers.150-180-400-1000 grit.Easy and fast fret polishing tool. Erasing the small scratches of the fret polishing or cleaning dirty frets. Because of this softness, rubber fits to fret arch perfectly. Also soft rubber keeps the fingerboard damage to a minimum. Easy to cut this rubber by cutter knife for your fret work. This...

Snel naar

  • Prijzen

    PrijzenProductomschrijving

    39,35

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    Hosco Japan H-FE1
    Hosco Japan H-FE1
    Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE1 is for small frets.
    60,95
    Hosco Japan H-FE2
    Hosco Japan H-FE2
    Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 2 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE2 is for medium frets.
    60,95
    Hosco Japan H-FE3
    Hosco Japan H-FE3
    Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE3 is for wide frets.
    60,95
    Hosco Japan H-FS10
    Hosco Japan H-FS10
    This brass fretsetter is ideal to tap down a fret without loosening the strings. If a fret has moved upwards, it can be reset with the fretsetter and a tap of a hammer.The fretsetter fits over the crown of the fret.This is a well designed brass tool with the right weight and a length of 100 mm and it has a width of 7 mm.Also very usefull to hold down a fret that is being glued in.
    32,75
    Cleaner Set - Lager Schoonmaak Set
    Cleaner Set - Lager Schoonmaak Set
    Bones Cleaner Kit - OnderhoudEindelijk een Bones Cleaner Kit van het lagerbedrijf waarmee alle kwaliteitsnormen worden gemeten.Gemaakt van gefluoreerd polyethyleen met hoge dichtheid7 afstandhouders voor een goede spoeling in minder tijdReinigt tot 8 lagers tegelijkReinigt alle skatelagersLagers en oplosmiddelen niet inbegrepenInstruction for the Bones Cleaner kit :Gently remove the non-contact rubber shield of the bearing by prying upwards from the center using a push-pin or by pressing it out from the back using a paper clip or pen knife. Do not clean the rubber shields with any solvent as this will cause the rubber to blister and ruin the fit on the bearing.Gently wipe them clean using a clean cloth or use soapy water. If you choose to use soapy water make sure to dry the shields completely before putting them back onto the bearing. We have tried many cleaners and solvents and have several recommendations. Citrus-based cleaners work but can leave a slight oily residue on the bearing…
    19,95
    Hosco Japan H-SB-2
    Hosco Japan H-SB-2
    Radius 10" /254 mm and 12" / 305 mm.80 mm x 150 mm. Sanding area is 65 mm x 150 mm.This double sides radiused sanding block will follow the radius of your fingerboard.For shaping fingerboards, stick our KCR100 to KCR240 self adhesive sandpaper to this block.For levelling frets use some less agressive grit KCR240 to KCR400 or even KCR600 self adhesive sandpaper.The radius of your fingerboard can be measured with our H-RG1B radius gauge.
    37,59
    Hosco Japan H-SB-3
    Hosco Japan H-SB-3
    Radius 14" /356 mm and 16" / 406 mm.80 mm x 150 mm. Sanding area is 65 mm x 150 mm.This double sides radiused sanding block will follow the radius of your fingerboard.For shaping fingerboards, stick our KCR100 to KCR240 self adhesive sandpaper to this block.For levelling frets use some less agressive grit KCR240 to KCR400 or even KCR600 self adhesive sandpaper.The radius of your fingerboard can be measured with our H-RG1B radius gauge.
    37,59
    Hosco Japan H-SB-4
    Hosco Japan H-SB-4
    Two radii: 15" /381 mm and 20" / 508 mm.80 mm x 150 mm. Sanding area is 65 mm x 150 mm.This double sides radiused sanding block will follow the radius of your fingerboard.For shaping fingerboards, stick our KCR100 to KCR240 self adhesive sandpaper to this block.For levelling frets use some less agressive grit KCR240 to KCR400 or even KCR600 self adhesive sandpaper.The radius of your fingerboard can be measured with our H-RG1B radius gauge.
    37,59
    Hosco Japan H-SB-1
    Hosco Japan H-SB-1
    Radius 7,25" /184 mm and 9,5" / 241 mm. 80 mm x 150 mm. Sanding area is 65 mm x 150 mm.This double sides radiused sanding block will follow the radius of your fingerboard.For shaping fingerboards, stick our KCR100 to KCR240 self adhesive sandpaper to this block.For levelling frets use some less agressive grit KCR240 to KCR400 or even KCR600 self adhesive sandpaper.The radius of your fingerboard can be measured with our H-RG2 radius gauge.
    37,59
    Hosco Japan H-IDP-410
    Hosco Japan H-IDP-410
    This compact dual grit diamond plate is ideal for honing sharp fret ends or for sharpening tools. The diamond surface makes for clean, precise and fast filing. The material is very durable and this file will last a very long time. Diamond files work on both strokes, back and forth. It will leave a smoother surface without chattering.One side is 400 grit, the other side is 1000 grit. size:30 x 100 mm
    36,09

    Klanten-reviews van Hosco Japan H-FPR-SET

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Hosco Japan H-FPR-SET

    Productomschrijving

    Set of 4 fret polishing rubbers.150-180-400-1000 grit.Easy and fast fret polishing tool. Erasing the small scratches of the fret polishing or cleaning dirty frets. Because of this softness, rubber fits to fret arch perfectly. Also soft rubber keeps the fingerboard damage to a minimum. Easy to cut this rubber by cutter knife for your fret work. This is a great rust remover and polisher!

    Verken gerelateerde categorieën

    InstrumenthoezenMuziekaccessoiresMuziekinstrumenten
    Shopblog.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.