shopblog.nl
Categorieën
  Sluiten

Inloggen

Verlanglijstje

Fender 0990834000

Fender 0990834000

500K potentiometer (usually associated with humbucking pickups) with 3/8" split-shaft design, for use as volume or tone control on nearly all U.S.- and Mexico-made Fender instruments with split-shaft potentiometers. Takes push-on control knob (no set screw). Mounting hardware and .022mf 250V tone capacitor included....

Snel naar

  • Prijzen

    PrijzenProductomschrijving

    20,79

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    Fender 0990835000
    Fender 0990835000
    500K potentiometer (usually associated with humbucking pickups) with 3/8" solid-shaft design, for use as volume or tone control on nearly all U.S.- and Mexico-made Fender instruments with solid-shaft potentiometers. Takes set screw-mount control knob. Mounting hardware and .022mf 250V tone capacitor included.
    19,95
    Fender 0990830000
    Fender 0990830000
    Pure Vintage PartsFender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses.But best of all, Pure Vintage guitar and amp electronics are also versatile enough to fit most Fender guitars and tube amplifiers, making it easier than ever to inject that vintage vibe into any setup.FeaturesVintage-accurate 250K 3/8" CTS split shaft potentiometer for volume or tone controlAccepts push-on-style control knobsIncludes mounting nut, washer and modern .022uf capacitorFits most vintage and modern Stratocaster® guitars
    19,95
    Fender 0991370000
    Fender 0991370000
    Set of three black control knobs (volume, volume, tone) with set screws and white indicator lines, designed to fit 1/4" split-shaft potentiometers on most U.S.- and Mexico-made Jazz Bass models manufactured from 1964-present.
    26,20
    Fender 0990933000
    Fender 0990933000
    Pure vintage partsFrom tone and volume knobs to pickup covers, bridge covers and more, Pure Vintage knobs and covers let you cosmetically customize your instrument or amplifier like never before. These genuine replacement parts are created with period-correct personality in mind to the same specifications as early Fender parts, allowing players to give any Fender amp, guitar or bass a shot of vintage-accurate looks and tone.FeaturesSet of six cream ribbed replacement amplifier control knobs with black indicator linesSet screw mountingIntroduced on Blonde and Brown-era amplifiersUsed on '63 Tube Reverb, Vibro-King®, Custom Vibrolux®, and Super-Sonic™ Series amplifiers.Fits most 1/4" solid shaft potentiometers on vintage and modern amplifiers and guitars
    43,90
    CTS USA CTS-B52/20
    CTS USA CTS-B52/20
    - standard length bushing .375"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for …
    140,09
    CTS USA CTS250-A56
    CTS USA CTS250-A56
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    11,20
    CTS USA CTS-A53/20
    CTS USA CTS-A53/20
    - standard length bushing .375"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for …
    140,09
    CTS USA CTS-A56/20
    CTS USA CTS-A56/20
    - short bushing .250"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone …
    128,59
    CTS USA CTS-A54/20
    CTS USA CTS-A54/20
    - long bushing .750"- 3/8" diameter- for LP-modelValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used f…
    156,79
    CTS USA CTS250-B50
    CTS USA CTS250-B50
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    12,60

    Klanten-reviews van Fender 0990834000

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Fender 0990834000

    Productomschrijving

    500K potentiometer (usually associated with humbucking pickups) with 3/8" split-shaft design, for use as volume or tone control on nearly all U.S.- and Mexico-made Fender instruments with split-shaft potentiometers. Takes push-on control knob (no set screw). Mounting hardware and .022mf 250V tone capacitor included.
    Shopblog.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.